[. . . ] The iron must be used and rested on a flat, stable, heat-resistant surface. When you place the iron on the iron rest, make sure that the surface on which you place it is stable. Always unplug your appliance: before filling, or rinsing the water tank, before cleaning it, after each use. [. . . ] Always unplug your appliance: before filling, or rinsing the water tank, before cleaning it, after each use. Children must be supervised to ensure that they do not play with the appliance. Keep the iron and its cord out of reach of children less than 8 years of age when it is energized or cooling down. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a save way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision. The appliance must not be used if it has fallen to the floor, shows evident of damage, leaks or fails to function correctly. The surfaces which are marked with this sign and the soleplate are very hot during the use of the appliances. IMPORTANT RECOMMANDATIONS
• The voltage of your electrical installation must correspond to that of the iron (220240V). You have stored the iron horizontally, without emptying it and without setting it to . Brown streaks come through the holes in the soleplate and stain the linen. DE
Never use ironing water additives; these will permanently damage your steam iron. Perform a Self cleaning operation and consult the chapter "What water should I use?Make sure that your laundry is rinsed sufficiently in order to remove any deposits of soap or chemical products on new clothes. Never iron over printed areas or applications – always iron the reverse side of such a garment. EN
Your linen has not been rinsed sufficiently or you have ironed a new garment before washing it. Your are ironing with an inappropriate temperature selection (temperature too high). [. . . ] Never iron over printed areas or applications – always iron the reverse side of such a garment. EN
Your linen has not been rinsed sufficiently or you have ironed a new garment before washing it. Your are ironing with an inappropriate temperature selection (temperature too high). [. . . ]